Empty engine blocks are just that, empty. No head, cam, lifters, crank, rods, gears, anything but the bare block itself and the crank main caps.

DU11-9

1500 ENGINE BLOCK, Empty
A bad example. This is destined to be scrapped. We'd like to see this go to someone who may need it one day. This one sat with water in one of the cylinders, will probably have to be bored 40, cannot be certain what it will take to clean it up and make it serviceable. No warranty of any kind about anything. This is not shippable, you'll have to arrange to pick it up locally. At least two of the main caps are with it, if the other one isn't there you'd have to use your old one and have the machine shop align-bore the journals. Over the next few years we plan on scrapping out a lot of stuff and will try to post it before it is sent off to be part of a bridge in China.

$40

DU11-10

1500 ENGINE BLOCK, Empty
This was a running engine, no signs of rust was on the valves in the head. Bores look good. You can buy it with the std. size pistons that were in it for an extra $100. Includes $40 non refundable packing charge.

$275

+........

FITS	PART#	DESCRIPTION	COST
ALL	112-02U	BRACKET ENG MOUNT R Side	$8
15 CD	112-03U	BRACKET ENG MOUNT L Side	$12
ALL*	151-01U	DIPSTICK, OIL *except 63 1500	$
	FLYWHEELS get surface cracks in them from use. You still need to surface these before you install your clutch. Gear teeth would be useable.
15	123-03U	FLYWHEEL	$75
16	123-04U	FLYWHEEL	$55
20	123-06U	FLYWHEEL	$75
15		MOUNT STAND, DISTRIBUTOR, cast iron	$32
16		MOUNT STAND, DISTRIBUTOR cast iron SAE	$40
16		MOUNT STAND, DISTRIBUTOR cast iron Metric	$32
20		MOUNT STAND, DISTRIBUTOR cast iron	$32
15 16	224-08U	DISTRIBUTOR OIL LINE	$16
20		DISTRIBUTOR OIL LINE	$20
15* 16*	152-12U	OIL DRAFT TUBE *if so equipped	$35
15 *C	152-20U	OIL FILTER CAN ASSY cartridge type	$55
15 *16	152-17U	OIL FILTER CONVERSION 1500 & *early 1600, converts your engine from old style cartridge to spin-on type filter, includes mount and new filter	$45
20	152-07U	OIL FILTER MOUNT	$
ALL		OIL PAN	$
16 20	111-04U	PLUG, OIL PAN	$
ABCD	123-08U	PULLEY, CRANK Info	$35
EFG	123-09U	PULLEY, CRANK, 68-70 1600 Info	$110
20	123-10U	PULLEY, CRANK, U20 Info	$110
		TACH DRIVE for dist base SAE	$20
		TACH DRIVE for dist base Metric	$16
15 CD	130-09U	TIMING COVER, R16	$28
EFG	135-01U	TIMING COVER, R16	$38
20	135-02U	TIMING COVER, U20	$67

Please EMAIL for items not listed.

HOW TO ORDER - - - -DELIVERY CHARGES and TIME

.....