....

FITS	PART#	DESCRIPTION	COST
All	626-02	BUMPER, FRONT	$736.18
	Bumper Brackets are on BODY, MISC page
E I All *	850-01	BUMPER, REAR *Original on non USA 68-70, USA 68, has indentation and hole for license lamp. Will fit all cars 62-70. Currently #265-01 light for this is $119.14 if you need one. Rear bumper without license light hole currently not available new.	$1123.16
All	626-04	BUMPER GUARD front or rear	$341.11
	GRILLS Check Used Grill Page
	Please See Headlight Trim Scoop Info Before Ordering
All	260-08	HEADLIGHT "SCOOP" Left "Base"	$164.40
All	260-09	HEADLIGHT "SCOOP" Right "Shiny"	$236.20
All	260-10	HEADLIGHT "SCOOP" Left "Satin"	$276.20
ABC	658-03	HOOD MOULDING	$69.22
DH	658-04	HOOD MOULDING	$188.14
FGIJK	658-05-O	HOOD MOULDING
EFGIJK	658-05-N	HOOD MOULDING See Info Before Ordering	$49.10
68-69	726-17	MOULDING, Stainless, Upper W/shld Frame	$64.11
All	626-06	PLUG, DRIVING LIGHT Hole	$17.66
BC	721-06	WINDSHIELD FRAME TOP PIECE	$198.14
DH	721-07	WINDSHIELD FRAME TOP PIECE	$198.14

Stainless Side Moulding

Please see Side Moulding INFO for fit info & OPTIONS Dinged New Pieces Check Odds and Ends moulding page, or check USED page SHIPPING NOTE: Door or FenderMoulding Orders have an additional charge of $8 for the hard shipping tube which will hold up to 6 pieces of moulding
FITS	PART#	DESCRIPTION	COST
		Number of clips each moulding used in ( ) Price is for ONE clip
*	638-08	CLIP, MOULDING, * concave FT (3) or DOOR (5)	$4.30
*	638-09	CLIP, MOULDING, * concave RR (6-7)	$5.45
*	638-10	CLIP, MOULDING, * convex FT (3) or DOOR (5)	$3.85
*	638-11	CLIP, MOULDING, * convex RR (6)	$9.66
	MOULDING, SIDE:
AB	808-12	DOOR, Left, concave	$78.10
AB	808-11	DOOR, Right, concave (or use 808-12 see fit INFO link, or check Odds and Ends page)
C	808-02	DOOR, Right, concave	$164.45
DEFG 20	808-03	DOOR, Left, convex	$78.10
DEFG 20	808-03-02	DOOR, Left, convex, quan 2	$129.45
DEFG 20	808-04	DOOR, Right, convex (use 808-03, see fit INFO link or check Odds and Ends page)
AB	638-03	FRONT FENDER, Right, concave	$194.16
C	638-04	FRONT FENDER, Left, concave	$78.10
C	638-05	FRONT FENDER, Right, concave	$184.22
AB	782-08	REAR FENDER, Left, concave	$159.11
AB	782-09	REAR FENDER, Right, concave (or use 782-08)	$189.11
C	782-04	REAR FENDER, Left, concave	$48.11
C	782-0	REAR FENDER, Right, concave	$236.46
DEFG 20	782-06	REAR FENDER, Left, convex	$149.11
DEFG 20	782-07	REAR FENDER, Right, convex	KIT

68-70 Stainless Windshield W/strip Moulding

FITS	PART#	DESCRIPTION	COST
68-70	726-18	COMPLETE SET 8 pieces
68-70	726-09	TOP	$166.60
68-70	726-12	BOTTOM	$149.13
68-70	726-11	LEFT	$24.42
68-70	726-10	RIGHT	$24.13
68-70	726-14	UP LEFT CORNER	$28.72
68-70	726-13	UP RIGHT CORNER	$19.86
68-70	726-16	LOW LEFT CORNER	$19.86
68-70	726-15	LOW RIGHT CORNER	$19.86

Kits and Packages

FITS	PART#	DESCRIPTION	COST
All	999-C2	HARDWARE, FRONT BUMPER 40 pc Set, includes bolts, nuts and washers.
All	999-	HARDWARE, REAR BUMPER if you have 2 rear brackets. 40 pc Set, includes bolts, nuts and washers.
All	999-	HARDWARE, REAR BUMPER if you have 3 rear brackets. 40 pc Set, includes bolts, nuts and washers.
All	626-08-8	PLUG,BUMPER, Nissan (if not using guards) set of 8	$48.20
Please see Side Moulding INFO for fit info & OPTIONS
16*20*	782-11	SIDE MOULDING SET Concave, * INFO	$596.18
16*20*	782-17	SIDE MOULDING SET Concave, * INFO	$485.00
16*20*	782-18	SIDE MOULDING SET Concave, * INFO	$365.00

RESTORED PARTS (Repaired and Rechromed)

FITS

PART#

DESCRIPTION

COST

HOW TO ORDER - - - -DELIVERY CHARGES and TIME

....