....

SU Carb (manufactured by Hitachi)
Before ordering parts we suggest checking the two green highlighted info pages.

FITS	PART#	DESCRIPTION	COST
20	165-38	AIR FILTER Element	$32.67
20	165-03	AIR FILTER HOSE, Internal, Original	$48.16
20	165-36	AIR FILTER WINGBOLT	$6.14
20	165-34	AIR FILTER WINGBOLT WASHER	$3.66
20	165-32	AIR FILTER WINGBOLT "NUT-BOLT"	$7.27
20	160-04A	CARBURETOR (pair), w/o return valve	$795.00
20	160-04AX	........Core Charge on 160-04A	$100.00
20	160-04B	CARBURETOR (pair), with return valve	$995.00
20	160-04BX	........Core Charge on 160-04B	$100.00
20	163-20	CONNECTING ROD, linkage rod w/plastic sockets orig.	$48.30
20	163-68	CONNECTING ROD, works, but not original	$28.11
Float, Float Valve and Float Lid INFO
20	160-06	FLOAT	$17.88
20	161-06	FLOAT VALVE Currently only in kits below	IN KITS
20	161-98	FLOAT LID	$22.65
ALL*	163-26	FUEL PIPE *90 degree carb	$49.22
ALL*	163-27	FUEL PIPE *180 degree carb	$20.81
I J K	161-B2	FUEL RETURN Valve, Service Option	$58.50
I J K	161-19	FUEL RETURN Valve, original SOLD OUT see option above
		GASKET, Carb to Air Cleaner: see ENGINE GASKETS
ALL	160-07	GASKET, FLOAT CHAMBER LID	$3.66
20	143-03	HEATSHIELD plate below carbs	$144.24
I J K	160-09	INLET SCREEN, Carb Fuel Inlets	$8.66
20	161-88	INSULATOR BLOCK w/gasks cb to manifold	$29.79
20	163-04	NEEDLE, METERING	$14.81
Metering Nozzle, Float Bowl and Fuel Pipe INFO
20*	163-33	NOZZLE, METERING *90 degree, rear carb	$31.86
20*	163-10	NOZZLE, METERING *180 degree	$26.55
ALL	163-12	NOZZLE SLEEVE (holds nozzle)	In Kits
ALL	163-34	PLUNGER cap and guide in oil chamber	$24.36
20	161-03	SPRING, THROTTLE RETURN	$16.06
20	161-41	THROTTLE PLATE	$22.66

2000 SU Kits and Packages

FITS	PART#	DESCRIPTION	COST
CARB KIT NOTE: Be sure to verify first that you actually have 2000 floats and float valves in your carbs. (see pics and info above) Kits below are for the correct parts, if your 2000 has 1600 float parts; you'll have to order the pieces individually. Some of the 70s came this way from the factory.
20	165-38-3	AIR FILTER 3-pack	$84.50
20	160-23	GASKET SET SU (does 2 carbs) float chamber gaskets and round "crush" washers	$11.65
20	160-A8	REBUILD KIT Minor (does 2 carbs) needles, float valves, plungers, above gasket set,in-carb filters (180 degree type) Order insulator blocks w/gaskets as necessary.	$189.50
90 Degree - - - 180 Degree ?? INFO
20*	160-C2	REBUILD KIT Major *180o type - does 2 carbs, needles, nozzles, nozzle sleeves, float seats, plungers, all gaskets and insulator blocks, filters,	$309.50
20*	160-B3	COMPLETE KIT *180o type (does 2 carbs) Includes "Major" kit #160-C2 listed above plus #160-25 Throttle Shaft Kit.	$379.50
20*	160-A6	REBUILD KIT Major *90o type - does 2 carbs, needles, correct front and rear nozzles, nozzle sleeves, float seats, plungers, all gaskets and insulator blocks	$419.50
20*	160-B2	COMPLETE KIT *90o type (does 2 carbs) Includes "Major" kit #160-A6 listed above plus #160-25 Throttle Shaft Kit.	$499.50
20*	16	SCREW SET *ISO INFO	$
20	163-67-2	SUCTION DOMES w/Piston (pair)	$425.00
20	160-25	THROTTLE SHAFT KIT Includes 2 throttle shafts, throttle plates, screws, original teflon or nylon strip bushings	$129.50

HOW TO ORDER - - - -DELIVERY CHARGES and TIME

....