Datsun Roadster Rear "LOWERING BLOCK MATERIAL" from Rallye



Datsun Roadster LOWERING BLOCK Material #DU55-4

Useable on all Datsun Roadsters
and a lot of other small rear leaf spring cars.

Aluminum stock to make lower blocks. Making lowering blocks to go between the rear axle and the spring is an easy and cheap way to drop the back of the car as opposed to changing the leaf springs. You also have the ability to adjust it up or down if you don't like a specific height.

I found this while going through the seemingly endless amount of boxes of things that were NEVER opened when we moved the warehouse in 1982.

Included are the following pieces. A few were already cut into smaller chunks and were drilled by someone back in the 70s.


.875" Thick: Two 2 3/8" x 3 3/4"
.740" Thick: One 2 1/4" x 22"
.161" Thick: Four 2 1/4" x 3 1/2"
.161" Thick: One 2 1/4" x 16"
.161" Thick: One 2 1/4" x 21 3/4"

Back Button Back to Used Rear Axle

To Rallye Homepage

Datsun SPL310 SPL311 SRL311 REAR WHEEL SPACERS from Rallye