RALLYE ENTERPRISES, LTD: Datsun Roadster 1600 Carb Gasket Option

Datsun Roadster Regulator from Rallye Enterprises, Ltd.

.

.

CARBURETOR GASKET - #161-92
This is a carburetor gasket for a 1500 from Nissan; but can be used on a 1600 as well. The bolt pattern is identical; as is the center hole; the only difference is the width of the gasket. If you have the original style rubber insulator mount it is an exact fit; if you have the later hard "bakelite" style insulator the gasket will stick out the sides unless you trace the insulator block on the gasket and trim the excess. It is an economical replacement if you don't need the insulator block, or don't wish to spend the over $20 per gasket that Nissan suggests we sell the correct gasket for. (EACH!)

Back to 1500/1600 Carbs

.		.

	CARBURETOR GASKET - #161-92 This is a carburetor gasket for a 1500 from Nissan; but can be used on a 1600 as well. The bolt pattern is identical; as is the center hole; the only difference is the width of the gasket. If you have the original style rubber insulator mount it is an exact fit; if you have the later hard "bakelite" style insulator the gasket will stick out the sides unless you trace the insulator block on the gasket and trim the excess. It is an economical replacement if you don't need the insulator block, or don't wish to spend the over $20 per gasket that Nissan suggests we sell the correct gasket for. (EACH!)