DATSUN 2000 CAMSHAFT #DR13-11

Datsun 2000 Parts from Rallye Enterprises, Ltd.

..............

..............

..............

..............

U20 Reground Camshaft w/hole
#DR13-11 Solex II ?

This is a fresh reground used cam. The front attaching flange has been modifed with a bigger hole for a larger locating dowel. This was probably done to use a gear that had been redrilled with new bolt holes so the cam timing could be advanced or just to strengthen dowel setup.Will not work with your cam gear unless you modify your gear. This appears to be a "Solex II" camshaft or was nicknamed the "C" cam. It is stamped "25510" on the rear end. I haven't had it since it was new so I cannot vouche for it's authenticity. Duration intake and exhaust 292 degrees; lift .458. No core required, sold outright.

Back to Odds & Ends, New

..............		..............
	U20 Reground Camshaft w/hole #DR13-11 Solex II ? This is a fresh reground used cam. The front attaching flange has been modifed with a bigger hole for a larger locating dowel. This was probably done to use a gear that had been redrilled with new bolt holes so the cam timing could be advanced or just to strengthen dowel setup.Will not work with your cam gear unless you modify your gear. This appears to be a "Solex II" camshaft or was nicknamed the "C" cam. It is stamped "25510" on the rear end. I haven't had it since it was new so I cannot vouche for it's authenticity. Duration intake and exhaust 292 degrees; lift .458. No core required, sold outright.