DATSUN 2000 CAMSHAFT #DR13-10

Datsun 2000 Parts from Rallye Enterprises, Ltd.

..............

..............

..............

..............

Reground U20 Camshaft
#DR13-10 w/peg

This is a fresh reground used cam. The front attaching flange has been modifed with a bigger locating dowel. This was probably done to use a gear that had been redrilled with new bolt holes so the cam timing could be advanced. Will not work with your cam gear unless you modify your gear. The end of the cam is stamped "Reed 1257". The grind is between the stock "Solex" cam (the "B" cam) and the "Solex #2" cam. Duration intake and exhaust 292 degrees; lift .458. No core required, sold outright.

Back to Odds & Ends, New

..............		..............
	Reground U20 Camshaft #DR13-10 w/peg This is a fresh reground used cam. The front attaching flange has been modifed with a bigger locating dowel. This was probably done to use a gear that had been redrilled with new bolt holes so the cam timing could be advanced. Will not work with your cam gear unless you modify your gear. The end of the cam is stamped "Reed 1257". The grind is between the stock "Solex" cam (the "B" cam) and the "Solex #2" cam. Duration intake and exhaust 292 degrees; lift .458. No core required, sold outright.